How To Remove A Hunter Ceiling Fan
How to Uninstall a Hunter Fan
Uninstalling a Hunter fan will crave you to disassemble the fan housing completely and take information technology autonomously piece by piece.
Uninstalling a Hunter fan takes patience and focus.
The Hunter fan, like all ceiling fans, has a motor that turns the blades, wires that connect the motor and the lights to the ability source, downshafts that hold the fan in place, and housings that continue everything together. Once you clear away all of these parts, you lot will be able to remove the fan from the ceiling.
-
Shut off the power to the room where the fan is to make sure you don't get shocked while uninstalling the fan.
-
Unscrew and remove any light bulbs that are fastened to the fan. Twist and loosen the knobs belongings the light-bulb covers to the fan and remove the covers.
-
Unscrew the electrical light housing from the bottom of the fan using the apartment-head screwdriver. Pull the housing off the fan and disconnect the electrical coupling that connects the lights to the power source by pulling the coupling apart with your hands. Remove the housing and the lite-seedling sockets from the bottom of the fan.
-
Unscrew the comprehend of the light housing from the lesser of the fan and remove it; the cover is attached with three screws. The electrical wires for the light are in a separate housing underneath the fan motor. This will open up upward the area of the fan blades.
-
Unscrew each fan blade from the lesser of the motor with a Phillips screwdriver and pull the bract off the motor.
-
Insert a apartment-head screwdriver betwixt the ceiling and the fan's trim ring, which has been snapped into place on the motor housing. Pry the trim ring off with the screwdriver.
-
Loosen the three screws on the canopy that are located near the ceiling and plow the canopy until it slips down to expose the inner wires. The canopy covers the motor and holds information technology in place. Remove the caps from the wires and untwist the wires. Repeat for all wires, then disconnect the wires that extend from the ceiling to the fan.
-
Unscrew the mounting bracket, which is the ring that attaches to the ceiling and holds the fan in place. Gently pull the mounting bracket abroad from the ceiling. Be careful to feed the ceiling wires through the downrod, which is the hollow tube in the center of the fan that holds the fan firmly, so that yous are only removing the fan wires.
- Ladder
- Phillips screwdriver
- Flat-caput screwdriver
Tip
It'due south a practiced idea to have someone on "standby" while yous're uninstalling a Hunter fan. If in that location are whatsoever wires still attached when you remove the mounting console, another person can support the fan while you disconnect the wires.
Source: https://homesteady.com/13407608/how-to-uninstall-a-hunter-fan
Posted by: robertsgois1936.blogspot.com
0 Response to "How To Remove A Hunter Ceiling Fan"
Post a Comment